|Place of Origin:||China|
|Minimum Order Quantity:||100piece|
|Packaging Details:||Plastic bag, carton packing,wooden case packing|
|Delivery Time:||5-25 days after receive payment|
|Material:||PP/Absorbent Cotton||Core Material:||Stainless Steel Perforated Cylinder/no Core|
|Working Pressure:||0.8Mpa||Working Temperature:||90℃|
|Applicable PH Value:||1-13||Filter Length:||10,20 30 40 Inches|
10"-50" 1micro PP Melt Blown Sediment water filter cartridge / water filter for RO systems in white
PP Melt Blown Filter Cartridge is using and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration.
As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong pollutants holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.
Applicable PH: 1-13
Working pressure: 0.6Mpa polypropylene skeleton,stainless steel skeleton 0.8Mpa
Working temperature: Fiberglass 90 ℃, absorbent cotton string 120 ℃, other cotton fiber, 90 ℃
Filter Length: 10,20 30 40 inches
Filter Diameter: φ65mm
Tangle cord specifications: PP line, cotton thread
|Filter medium:||PP melt blown Filter Cartridge|
|Relative filtration pore size:||1 - 100 µm|
|Outer diameter||63 mm, 85 mm,115mm|
|Inner diameter||28 ~ 30 mm|
|Interface||Flat, insert, screwed|
|Effective filtration area||≥0.045 m2/10"|
|Max. operating temperature||60°C,0.2 MPa|
|Max. positive pressure||0.2 MPa(25°C)|
|Max. back pressure||0.1 MPa(25°C)|
|Others||special requirement of diameter and end caps can be customized|
(1)Continuous polypropylene wirewound filter element, all the parameters was arrange by the computer ,which ensure the product performance.
(2) Uniform working in full filter element/epoxy coated filter
(3) With stainless steel threaded coupling centers and interface connector.
(4) The special design for backflushing .
(5) High-pollution capacity in full-length filter.
(6) Run a small resistance, strong adsorption.
(7) Provide different sizes filter element for powdex/ pre-filters.
(9) Large flow rate, smaller area, easily installation.
(10) Simple system.There is no pollution acid consumption and waste, deal with the waste easily to protect for well environment.
(11)Low-cost investment , small pressure loss during the treatment