|Place of Origin:||China|
|Minimum Order Quantity:||1piece|
|Price:||USD 15 - USD200 /piece|
|Packaging Details:||carton packing, then woodencase|
|Delivery Time:||5-25 days after receive payment|
|Payment Terms:||T/T, Western Union, MoneyGram|
|Supply Ability:||10000 piece/month|
|Material:||Stainless Steel||Description:||Pressure Reflief Valve Replacement|
|Application:||Release Pressure||Model:||Multiple Model|
|Size:||15mm To 1100mm||Burst Ratings::||0.1 To 2000 Barg|
stainless steel Bursting Discs /Rupture Disk /Bursting Discs for Hydraulic Equipments
The rupture disk safety device is a non-reclosing pressure relief device consisting of such parts as a bursting disc (component) and a holder (supporting ring). It is able to burst at a certain temperature or pressure, protecting equipments and staff safety by releasing the pressure in the system.The bursting disc is an important safety device for pressure vessels and pipes.
1.Simple structure, high sensitmty, accuracy, zero leak, strong discharging capability, and strong capability of recycling under pressure
2.It maintains high operation precision even in sticky, high-temperature,low-temperature, and corrosive environments in combination with a safety valve.
3.It is an ideal safety device for ultra-high pressure vessels, widely used in the omchemical, pharmaceutical, new energy, and low-temperature equipment industries.
4.It can be classified into three catagories: domed bursting discs, reverse domed bursting discs and flat bursting discs.
· Broad range of application, and can choose the corresponding assembly according to different burst pressure and vent area.
· Manufacturing ranges depend much on material strength.
· Designed for gas, liquid service
· Suitable for high temperature and pressure conditions.
· Maximum operating pressure equal to or less than 70% of the minimum burst pressure, and not suitable for pressure pulsating conditions.
· Fragments on burst.
· Short service life and easily cause creep deformation and fatigue damage
· Obvious temperature effect may cause burst pressure fluctuation. The temperature goes up while burst pressure declines.
1 )The maximum operating pressure is up to 80% of the bursting pressure; the product is not applicable to environments with fluctuating pressure, which leads to metal fatigue;
2)The product leaves a small amount of debris after bursting, and can not be used in tandem with a safety valve.
When TEF or a similar material is used for sealing, the working temperature of the product may be restricted by that of the seal membrane material.
3)Based on the specific process needs of a system, auxiliary devices such as a vacuum bracket or a stiffening ring can be added to obtain LPZ, LPH, or LPHZ models.
Gaseous, liquid, or powdery environments with a medium or low pressure.
|BURST PRESSURE RANGES (MPa)||0.01~500|
|BACKPRESSURE (VACUUM) SUPPORT||AVAILABLE|
|DISK HOLDER TYPE||LJB|
|DYNAMIC RESPONSE (sec)||＞1/1000|
|INFLAMMABLE MEDIA USAGE||NOT SUITABLE|
|CYCLE LIFE||＞12,000 [OPERATING RATIOS≤70%]|
|CYCLE RESISTANCE CAPABILITY||ORDINARY|
|SAFETY VALVE ISOLATION||NOT AVAILABLE|
|NOTE||VACUUM CONDITION SHOULD BE SPECIFIED|
· Manufacturing Pressure Ranges
Contact us directly