|Place of Origin:||China|
|Minimum Order Quantity:||1 piece|
|Packaging Details:||Plastic bag, carton packing,wooden case packing|
|Delivery Time:||5-25 days after receive payment|
|Material:||PP/Absorbent Cotton||Core Material:||Stainless Steel Perforated Cylinder/no Core|
|Working Pressure:||0.8Mpa||Working Temperature:||90℃|
|Applicable PH Value:||1-13||Filter Length:||10,20 30 40 Inches|
|Color:||White||Outer Diameter:||65 (2.5'') Mm|
|Filtration Area(m2):||0.4 M2 /10''||Inner Diameter:||28mm (1.10")|
|Filtration Efficiency:||≥ 90 %||Operating Temperature:||55℃ (131 °F)|
10'' 5 micron Pre Filtration Melt Blown Sediment PP Water Filter / water filter cartridge for RO systems
PP Melt Blown Filter Cartridge is using and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration.
As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong pollutants holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.
Applicable PH: 1-13
Working pressure: 0.6Mpa polypropylene skeleton,stainless steel skeleton 0.8Mpa
Working temperature: Fiberglass 90 ℃, absorbent cotton string 120 ℃, other cotton fiber, 90 ℃
Filter Length: 10,20 30 40 inches
Filter Diameter: φ65mm
Tangle cord specifications: PP line, cotton thread
|Filter Media||Melt Blown Polypropylene|
|Inner core||PP or core less|
|Seal Method||Thermal Bonding, No Adhesives|
|O-rings/ Gaskets(only for 222,226,DOE)||Silicone/Nitrile/EPDM/Viton/Teflon|
|Micron Rating||1.0, 5.0, 10, 20, 50, 70, 100um|
|Normal Operating Temperature||<50℃|
|Max. Operating Temperature||<80℃|
|Normal flow direction pressure||4.0 bar(58 psi)|
|Reverse flow direction pressure||2.0 bar(29pci)|
|Filtration efficiency||≥ 80%|
|Outer Diameter||Φ 63(2.5'')/114(4.5) mm|
|Inner Diameter||Φ 28mm (1.10")|
|Filtration area(m2)||0.4 /10''|
|Length(based on DOE end cap)||10’’, 20’’, 30’’, 40’’, 50'', 60''|
(1)Continuous polypropylene wirewound filter element, all the parameters was arrange by the computer ,which ensure the product performance.
(2) Uniform working in full filter element/epoxy coated filter
(3) With stainless steel threaded coupling centers and interface connector.
(4) The special design for backflushing .
(5) High-pollution capacity in full-length filter.
(6) Run a small resistance, strong adsorption.
(7) Provide different sizes filter element for powdex/ pre-filters.
(9) Large flow rate, smaller area, easily installation.
(10) Simple system.There is no pollution acid consumption and waste, deal with the waste easily to protect for well environment.
(11)Low-cost investment , small pressure loss during the treatment
Stainless steel Sintered Metal felt Filter with high filturation for different size / SS sintered filter
304 316L Stainless Steel Sintered Mesh Provides 3 layers, 4 layers, 5 layers, sintered mesh
customized food grade Stainless Steel different type of Filter cartridge/core filter strainer
Stainless Steel 316L 25 Micron Stainless steel sintered mesh filter
Folding microporous membrane Nylon water filter/ Hydrophobic Ptfe Membrane Media Pleat Filter Cartridge
10" -50" 1micro PP Melt Blown Sediment water filter cartridge / water filter for RO systems in white
10" length and 5um wire wound water filter element / string wound filter/PP sediment string wound cartridge filter
5um PP Yarn String Wound Filter Cartridges with stainless steel Core or PP Core
LP bursting disc / Non-reclosing pressure relief device disc rupture / fike rupture discs / rupture disc manufacturers
Panel bursting disc / 316 stainless steel rupture disk / disc rupture/ concave bursting discs
Rectangular flat slotted type dis rupt / stainless steel rupture disk
YC bursting disc / Pressure reflief valve replacement concave bursting discs / rupture disk for safety